Products
Car washer product
Rollover car wash machine(CF-370)
Description:
The high-speed car wash system (CF-370) is one of our high-end types of the rollover car wash systems. After over 3 years of research and development, Risense has launched this car wash system with tire brushes to satisfy the higher requirements of some customers. The high-speed car wash machine can rinse different parts of the vehicle at one time, and hence save time and resources.
Features:
Equipment Parameter
Rollover car wash machine | |
CF-370 | |
Overall dimension | 1.94*3.9*3.08m |
Rail: 9m*3.2m/height of drag chain 3.15m | |
Installation scope | 11*4.3*3.3m(leave some space at both sides for checking) |
Voltage | AC380V50Hz |
Water-source requirement | Pipe diameter DN25 water flow≥80L/min |
Air-source requirement | 0.75-0.9Mpa |
Ground flatness | Error≤10mm |
Available car to wash | Car/jeep/coach within 10 seats |
Moving range | 5.4m*2.1m（outside mirror width）*2.1m |
Car wash capacity | One rollover 2ˊ45〞/ two rollover 5ˊ20〞/three rollover 7ˊ20〞 |
Water consumption | One rollover 85L/car/two rollover:110L/car/three rollover:130L/car |
Power consumption | 0.46-0.65kwh/car |
Shampoo consumption | 15ml/set |
Wax consumption | 20ml/set |
Short vertical brushes | 2 |
Long vertical brushes | 2 |
Top brush | 1 |
Frame | ZFC alloy steel hot-dipped galvanized steel frame |
Brush material | The 4th-generation foam brush |
Control system | MCU（Risense） |
Monitoring optoelectronic | Banner from the USA |
Proximity Switch | PEPPERL FUCHS from Germany |
Contactor | Siemens from Germany |
Solenoid valve | Pinguan |
Thermal relay | Schneider from France |
MCCB | Schneider from France |
Motor protector | Schneider from France |
Intermediate relay | Honeywell from the USA |
Elevating brake motor | SITI |
Brush rotating motor | SITI |
Equipment Advantages
Fully automatic MCU control system
Hot dipped galvanized steel frame
5 brushes( 1 top brush+2 short tyre brushes+2 long brushes
4 strong air blower, the direct air blower at the top dry the car according to the shape of its body.
Fully automatic shampoo and wax absorption system.
High pressure water pre-wash---shampoo---tyre wash----long brush wash----low pressure wash----wax spraying----drying.
A number of brushes could wash the car completely without any dead angle.
Low cost and economical.
With high resolution sensor, PLC control, it is safer.
Easy operation with two-button pressure car wash.
Engergy and water saving.
With failure recognition programe, it is identify and fix the breakdown
Equipment Parameter
Optional equipments:
Chassis washing system
side washing system
tyre washer
vaccumm cleaner
car mat cleaner
water recycling system
